Avon EB450 Parking Drop Arm Gates are ideal rising arm beam barriers for medium to high usage and can be used as car park drop arm gates and security beam barriers.

EB450 parking beam barriers can easily integrate with revenue collection and access control systems.

Avon EB450 parking gates stand 1135mm above foundation level, with the gate's rising beam also known as a boom, 840mm above foundation level, the heavy duty motor plate supports the 100% duty cycle permanent capacitor 4 pole T.E.F.C. motor which provides the power for the sinusoidal drive mechanism via an industrial grade low ratio gearbox. Two heavy duty bearings support the drive shaft, this having 2 machined cams to activate the adjustable limit switches to control the boom travel.

The parking gates hinged lockable steel top cover provides access to the drive mechanism. The parking gates cabinet houses the barrier 'parking logic' control panel. providing the necessary power supply isolator, fuses, thermal overload trips and motor contactors.

An integral support is provided to maintain the gate beam also known as boom in the horizontal position, but an adjustable spring loaded end steady can be supplied if required.

It is recommended that the gate is secured to the foundations using 4 nos M12 x 160mm chemical anchors.

For safety reasons pedestrians, cyclists and motorcycles are advised not to use a gate controlled roadway, additional safety measures can be incorporated into the barrier system if required.

View our other automatic parking and security drop arm gates

EB750 Security Drop Arm Gates

Drop Arm Gates - Security, Traffic

Drop Arm Gates | Crash Beam