The RB1000CR Centurion Road Blocker is a crash tested ASTM F2656 (M50 P1) road blocker and is HCIS compliant (see options) with 1000mm raised height blocking segment.
Avon RB1000CR provides a high level of security against unauthorised vehicle access.
Developed and manufactured by engineers with significant experience in the fields of physical security and vehicle access control, it is a highly dependable security product that will easily interface with a wide range of control equipment.
Assembled in our fabrication facilities using heavy gauge materials to give maximum strength and durability, the RB1000CR Road Blocker is an ideal product to protect high security establishments, iconic buildings and critical infrastructure.
Key features & benefits
Physically impact tested in accordance with the US standard ASTM F2656 by the Motor Industry Research Association (MIRA), achieving an M50 P1 rating and remaining operational after impact.
The blocker has a 1000mm high blocking segment and is designed as a Hostile Vehicle Mitigation (HVM) solution providing protection to sites from extreme Vehicle Borne Improvised Explosive Device (VBIED) attack.
The road blocker comes with a push-button control as standard, however it can be customised to interface with a wide range of access control equipment to suit specific customer requirements (available as options).
The blocker is also available as an optional HCIS Road Blocker specifically designed to comply with the Kingdom of Saudi Arabia’s (KSA) Ministry of Interior, HCIS Security Directives Sec 06 4.3.3 for crash barriers.
The road blocker can be customised to interface with a wide range of access control equipment to suit specific customer requirements. Available configurations include (but are not limited to) inductive loop systems, card readers, communication equipment and manned guard emergency systems.
This is a specialist high security product and is designed for use with vehicles only and a full site risk assessment must be carried out at design stage to ensure that all relevant safety systems are included. Where the blockers control point is remote from the installation, we strongly recommend the fitting of a recordable CCTV system. For safety reasons pedestrians, cyclists and motorcycles should not to use a blocker controlled roadway.
|3m Road Blocker:
|3508mm W x 2015mm D x 1280mm H
|935mm W x 660mm D x 1295mm H
|Raised height of blocking segment:
|Blocker widths available:
|2-5 metres in 500mm increments
|Basic Power requirements:
|3-Phase 380/415v AC, 50/60Hz
|Loading 30 Tonnes
|ASTM F2656-07 M50 P1
|3m blocking segment 1000 mm high blocking segment (raised)
|Speed of operation:
|6 Seconds to raise or lower (alternative speeds available)
|Emergency Fast Operation (EFO) (option):
|<1.5 seconds to raise
|Operating temperature range available (option):
|-25°C – +75°C
|Operating humidity range available (option):
|5% to 100% (non condensing)
|The supporting framework is constructed from fully welded, heavy gauge, high strength, structural steels completely encased with steel sheets to provide a self-shuttered module. Sub-surface fixing points ensure the blocker is completely secured to its foundation. It is constructed from steel that complies with ASTM A514/517* *Or European equivalent EN standards.
Datasheet – Avon RB1000CR Centurion Road Blocker
Datasheet for RB1000CR Chieftain Road Blocker, ASTM 2656-07 crash tested Hostile Vehicle Mitigation (HVM) Solution
Specification – Avon RB1000CR Centurion Road Blocker
Procurement Specification for a ASTM 2656-07 High Security Road Blocker (HSRB)
Drawings – Avon RB1000CR Centurion Road Blocker
General PDF Drawings for Avon RB1000CR Centurion Road Blocker, an ASTM 2656 crash tested blocker providing a high level of security against unauthorised vehicle access.
AVON BARRIER ANNOUNCES PARTNERSHIP WITH GUNNEBO AUSTRALIA Extending Avon Barrier’s Global Reach of Physical Security Protection from Vehicle Borne Threats Avon Barrier is delighted to announce a new Partnership…